|
Here's a way to section off hazard areas, construct tool
rooms, maintenance rooms, stock rooms, electrical equipment rooms
all at low cost and fast installation. Partitions are coated with
a Gray enamel, providing a long-lasting smooth high-gloss finish.
 Quality and dependability
you can't find in any other partitions. FOB Shipping Point.
Standard Size Panels are available in 1', 2', 3', 4',
and 5' widths; 7', 8', 9' and 10' heights. Most jobs can be
planned around these even foot dimensions.
Stock Hinged Doors are made in 3' and 4' widths and are
7' high with transom above. No transom on 7' high partition.
Unless requested otherwise, doors are supplied hinged left, swing
out (viewed from outside partition enclosure).
Sliding Single Doors are available in 3', 4', 5', 6'
widths and are 7' clear with transom above. Full Height Single
Slide Doors are made to provide overhead height up to the height
of the partitioning (8', 9' or 10') and 5', 6', 8' and 10'
wide.
Hardware & Components Included With Panels:
Floor Shoes - High grade iron casting with set screw, plus two slotted holes for floor attachment. Anchors are included.
Top Capping Channels - Are 1-1/2" x 1/2" x 1/8" hot
rolled channel. Two fasteners are provided with each channel.
Horizontal Stiffener Channels - Two 1" x 3/8" x 1/8"
channel on each side of wire mesh. 3' 3" above bottom of vertical
channel bolted through mesh. All necessary bolts, nuts, clips and
floor lags included. |
